Does the pump run for long periods of time without shutting off?
If so, the contacts are probably sticking, which would cause the pump to build up too much pressure and overheat.
If this is the case, there should be a small cover on the side of the well pump. Take the cover off. You will see the copper point contacts there.
Take a flat head screwdriver or the tip of your pocket knife and force them apart.
Check to see if they are burnt/eaten away. If so, you will need to write down the brand name of your pump, plus the model number. Then take the points/contact off. Take the part and the pump information to a local part supplier to purchase a new set. (Probably around 10 to 15 dollars).
If the contacts look okay, then just clean them off. Spray them down with WD40.
Replace the cover and you should be all set.
If so, the contacts are probably sticking, which would cause the pump to build up too much pressure and overheat.
If this is the case, there should be a small cover on the side of the well pump. Take the cover off. You will see the copper point contacts there.
Take a flat head screwdriver or the tip of your pocket knife and force them apart.
Check to see if they are burnt/eaten away. If so, you will need to write down the brand name of your pump, plus the model number. Then take the points/contact off. Take the part and the pump information to a local part supplier to purchase a new set. (Probably around 10 to 15 dollars).
If the contacts look okay, then just clean them off. Spray them down with WD40.
Replace the cover and you should be all set.
