Anonymous

How To Bypass Your Electric Meter?

5

5 Answers

Rob Facey Profile
Rob Facey answered
With electricity prices soaring and everyone feeling the pinch on utility bills across the board, there is more and more temptation than ever to bypass your electricity meter in order to save a bit of money. There are two things to remember here though. One, it can be extremely dangerous if you don't know what you are doing, most qualified electricians will not want to carry out such a job. And secondly, it is illegal, if you do such a procedure it is purely your responsibility and any consequences are down to you.
Some customers have been known to tape a strong magnet to the meter box, as close to the wheel as possible. Apparently this can help to slow down the speed in which the wheel turns, but it is worth remembering to remove the magnet should you get a visit from the electricity board to read the meter as this too is against the law.
It is a much better option to make more of an effort to save electricity. Most statistics show that electricity companies can track down bypassed meters and have an almost 100% success rate in charging customers. Try turning off your television sets at night when they are not being used and not just leaving them on standby. Lights should be turned off at all times or you could try using energy saving light bulbs, which are more expensive but last longer and use less energy. There are also small plug-in devices in the market which are perfectly legal and help to reduce energy spikes from occurring, thus saving you money in the long run.
Anonymous Profile
Anonymous answered
The 4 wires going into a prepay meter the middle two are neutral the 2 end wires are live take out 1 of the 2 screws out of each and join them using thick wire
thanked the writer.
Anonymous
Anonymous commented
How do you remove this wire my friend did this when she was staying in my house and I want to remove it
Anonymous Profile
Anonymous answered
I don't know how to bypass but I have heard if you tape a strong magnet facing that spinning wheel it will slow it down a lot...this will decrease meter reading...I've never tried it and probably never will...I was told this in college by an engineering student 30 years ago.  He said you have to know when the meter reader comes around so you can remove the magnet....I don't know if this works but it seems safe enough...anybody else heard about this technique?
Anonymous Profile
Anonymous answered
Its dangerous, and illegal. But if you know what your doing , relatively easy

Answer Question

Anonymous