Why Does My Washing Machine Not Spin All Of The Water Out Of My Clothes?

8 Answers

Anonymous Profile
Anonymous answered
If it is unbalanced, it won't spin the water out properly either.
thanked the writer.
Anonymous
Anonymous commented
You gave the best answer there is to this problem other than if one stuffs so much clothes in it that it can't possably work as it should.but if happening all the time...check the balance pads and tension springs...may be wore out if machine is a bit old.
Anonymous Profile
Anonymous answered
After dismantling it, I found out that the outer tub came off or disconnected from the inner tube due to rust built up.  That is the reason for it spinning in the middle but not moving the tub itself.
Anonymous Profile
Anonymous answered
It is broken. No doubt needs a new bearing.
Anonymous Profile
Anonymous answered
Our side loading Whirlpool washing machine drain was clogged with the grand baby's socks.
Anonymous Profile
Anonymous answered
You will need to change the belt. It is probably worn
susan dixon Profile
susan dixon answered
It sounds like you have a fault with your machine get the manufacture to look at it of it is still insured if not you will need a new one. Hope this helps
thanked the writer.
Anonymous
Anonymous commented
Yes it has a fault! She wants to know the reason and yours is just plain bogus. To you,if its not under warranty then just junk it and buy another.here's the best answer as only one has said...out of balance.if off balance the machine cannot pick up the spinning speed it needs to force the water from the clothes.it may only pick up half the speed needed.out of balance can be figured if the machine has excessive vibration,walks across the floor or a thumping noise from the drum being thrown into the outer shell of machine.
Anonymous Profile
Anonymous answered
Maybe its due to clothes overload or you filter is semi blocked not totally sure
thanked the writer.
Anonymous
Anonymous commented
Podria preguntar en espanol para entender mejor o mejor dicho pueden responder en espanol...
Anonymous Profile
Anonymous answered
Probably the drain pump is cloggled or defective, or the hose is kinked or clogged too. Because if spin normally I do not think the belt is the problem.

Answer Question

Anonymous